No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ftds delay_statistics_switch

show ftds delay_statistics_switch

Function

The show ftds delay_statistics_switch command is used to show configuration information about the specified LUN or file system whose latency statistics are collected on a specified controller.

Format

show ftds delay_statistics_switch controller=?

Parameters

Parameter

Description

Value

controller

ID of a controller.

To obtain the value, run "show controller general".

Views

Developer view

Usage Guidelines

None

Example

  • When the latency statistics function is enabled for the LUN or file system on controller 0A, show configuration information about the LUN or file system whose latency statistics are collected on controller 0A.
    developer:/>show ftds delay_statistics_switch controller=0A 
      
      Type : lun  
      ID : 0
  • When the latency statistics function is disabled for the LUN or file system on controller 0A, show configuration information about the LUN or file system whose latency statistics are collected on controller 0A.
    developer:/>show ftds delay_statistics_switch controller=0A 
    Command executed successfully. 
    No matching records. 
     

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Type

Statistics type.

ID

ID of a specified statistics object.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 631998

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next