No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lmr showpairctrlinfo

lmr showpairctrlinfo

Function

The lmr showpairctrlinfo command is used to check the control information about a hyper mirror.

Format

lmr showpairctrlinfo [ pair id ]

Parameters

Parameter

Description

Value

pair id

Hyper mirror ID.

To obtain the value, run the lmr getpairid lun id command on the work controller of the source LUN in the diagnose mode.

Views

Diagnostic view

Usage Guidelines

None

Example

To check the control information about a hyper mirror, run the following command.

admin:/diagnose>lmr showpairctrlinfo 0 
Pair Ctrl info list 
pairId : 0 
serviceFlag : LUN_SERVICE_START 
bgrFlag : LUN_BGR_START 
self heal Time : 0 
pair is data OK : FALSE 
bgr chunk jiffis: 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

pairId

Volume mirror ID.

serviceFlag

Volume mirror starting and stopping service flag.

bgrFlag

Volume mirror starting and stopping BGR flag.

self heal Time

self-healing time.

pair is data OK

Data consistency.

bgr chunk jiffis

Copy start time.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 630669

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next