No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xnet showstat

xnet showstat

Function

The xnet showstat command is used to query statistics of sending and receiving XNET messages between the current controller and a module of a controller.

Format

xnet showstat -c controller -l link_type -p pid

Parameters

Parameter

Description

Value

controller

Controller ID.

The value ranges from 0 to the number of controllers minus one.

link_type

Link type.

The value can be 0 or 1.

  • 0: data link.
  • 1: control link.

pid

Module ID.

The value ranges from 0 to 1023.

Views

Diagnostic view

Usage Guidelines

  • This command is used by R&D engineers to locate faults.
  • When running this command, ensure that parameter values are in the valid range.

Example

Query statistics of sending and receiving XNET messages between the current controller and module "47" of controller "1" through GE links.

admin:/diagnose>xnet showstat -c 1 -l 1 -p 47 
xnet ETH link statistic :  
xnet controller 1 pid 47 send post count: 6413  
xnet controller 1 pid 47 send req count: 56474  
xnet controller 1 pid 47 send rsp count: 570678  
xnet controller 1 pid 47 send success post count: 6412  
xnet controller 1 pid 47 send success req count: 56474  
xnet controller 1 pid 47 send success rsp count: 570678  
xnet controller 1 pid 47 send timeout post count: 0  
xnet controller 1 pid 47 send timeout req count: 0  
xnet controller 1 pid 47 send timeout rsp count: 0  
xnet controller 1 pid 47 add readyQ fail post count: 0  
xnet controller 1 pid 47 add readyQ fail req count: 0  
xnet controller 1 pid 47 add readyQ fail rsp count: 0  
xnet controller 1 pid 47 send fail post count: 1  
xnet controller 1 pid 47 send fail req count: 0  
xnet controller 1 pid 47 send fail rsp count: 0  
xnet controller 1 pid 47 rcv post count: 3  
xnet controller 1 pid 47 rcv req count: 570679  
xnet controller 1 pid 47 rcv rsp count: 56472  
xnet controller 1 pid 47 rcv invalid post count: 0  
xnet controller 1 pid 47 rcv invalid req count: 0  
xnet controller 1 pid 47 rcv invalid rsp count: 0  
xnet controller 1 pid 47 timeout post count: 0  
xnet controller 1 pid 47 timeout req count: 2  
xnet controller 1 pid 47 timeout rsp count: 0  
xnet controller 1 pid 47 invalid success post count: 0  
xnet controller 1 pid 47 invalid success req count: 0  
xnet controller 1 pid 47 invalid success rsp count: 0  
xnet controller 1 pid 47 ge to pcie count: 0 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

xnet ETH link statistic

Statistics collected through GE links.

send post count

Count of sent post messages.

send req count

Count of sent request messages.

send rsp count

Count of sent response messages.

send success post count

Count of successfully sent post messages.

send success req count

Count of successfully sent request messages.

send success rsp count

Count of successfully sent response messages.

send timeout post count

Count of sent post messages that timed out.

send timeout req count

Count of sent request messages that timed out.

send timeout rsp count

Count of sent response messages that timed out.

add readyQ fail post count

Count of failures to add post messages to queues.

add readyQ fail req count

Count of failures to add request messages to queues.

add readyQ fail rsp count

Count of failures to add response messages to queues.

send fail post count

Count of post messages that failed to be sent.

send fail req count

Count of request messages that failed to be sent.

send fail rsp count

Count of response messages that failed to be sent.

rcv post count

Count of received post messages.

rcv req count

Count of received request messages.

rcv rsp count

Count of received response messages.

rcv invalid post

Count of invalid received post messages.

rcv invalid req

Count of invalid received request messages.

rcv invalid rsp

Count of invalid received response messages.

timeout post count

Count of timed out post messages.

timeout req count

Count of timed out request messages.

timeout rsp count

Count of timed out response messages.

invalid success post count

Count of invalid sending success notification post messages.

invalid success req count

Count of invalid sending success notification request messages.

invalid success rsp count

Count of invalid sending success notification response messages.

ge to pcie count

Count of GE to PCIe.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638091

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next