No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
epl showevent

epl showevent

Function

The epl showevent command is used to view information about the link event from BDM.

Format

epl showevent

Parameters

None

Views

Diagnostic view

Usage Guidelines

The epl showevent command is used only on the working controller of the link.

Example

View information about the link event from BDM.

admin:/diagnose>epl showevent 

Array            Type  Stat LCtrl RCtrl LPort  RPort  nPort  SdevId Band     Depth lWWPN/lIP        rWWPN/rIP        Time                Jiffies        iniFW  tgtFW 
 21000c45baa39394 FC Up 0     0     110000 110002 110000 32769  8000000  1024  20000c45babaad47 20020c45baa39394 2016-12-01 15:37:40 49959          0      0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Array

WWN of the remote device.

Type

Type of the link.

Stat

Status of the link event.

LCtrl

ID of the local controller.

RCtrl

ID of the remote controller.

LPort

ID of the local port.

RPort

ID of the remote port.

nPort

New ID of the remote port.

SdevId

ID of the BDM link.

Band

Bandwidth of the link.

lWWPN/lIP

WWPN or IP address of the local port.

rWWPN/rIP

WWPN or IP address of the remote port.

Time

Time of the link event.

Jiffies

Jiffies value of the link event.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 637106

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next