No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show firewall general

show firewall general


The show firewall general command is used to query details about firewalls in the system.


show firewall general [ address_family=? ]






Address family.

Address family configured for the firewall.


Developer view

Usage Guidelines

  • Run the show firewall general command to query firewalls in the system.
  • Run the show firewall general address_family=ipv4 command to query IPv4 address firewalls in the system.
  • Run the show firewall general address_family=ipv6 command to query IPv6 address firewalls in the system.


Query firewall configurations. The command output varies depending on a specific product.

developer:/>show firewall general 
---------------IPV4 Firewall Config:--------------- 
ID  Destination Mask         Prohibited Service 
--  ----------- ------------- ------------------ 
1 ftp,http 
---------------IPV6 Firewall Config:--------------- 
ID  Destination Prefix Length Prohibited Service 
--  ----------- ------------- ------------------ 
2 2233::4433 128        ftp,http

System Response

The following table describes the parameter meanings.




Firewall rule ID.


Destination IP address.


Destination IP address mask.

Prefix Length

Prefix length.

Prohibited Service

Disabled service.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 629377

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next