No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show firewall general

show firewall general

Function

The show firewall general command is used to query details about firewalls in the system.

Format

show firewall general [ address_family=? ]

Parameters

Parameter

Description

Value

address_family=?

Address family.

Address family configured for the firewall.

Views

Developer view

Usage Guidelines

  • Run the show firewall general command to query firewalls in the system.
  • Run the show firewall general address_family=ipv4 command to query IPv4 address firewalls in the system.
  • Run the show firewall general address_family=ipv6 command to query IPv6 address firewalls in the system.

Example

Query firewall configurations. The command output varies depending on a specific product.

developer:/>show firewall general 
---------------IPV4 Firewall Config:--------------- 
ID  Destination Mask         Prohibited Service 
--  ----------- ------------- ------------------ 
1   192.168.1.9 255.255.255.255 ftp,http 
---------------IPV6 Firewall Config:--------------- 
ID  Destination Prefix Length Prohibited Service 
--  ----------- ------------- ------------------ 
2 2233::4433 128        ftp,http

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Firewall rule ID.

Destination

Destination IP address.

Mask

Destination IP address mask.

Prefix Length

Prefix length.

Prohibited Service

Disabled service.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 607810

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next