No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system switch

show file_system switch

Function

The show file_system switch command is used to show whether a file system's sub-function is enabled.

Format

show file_system switch file_system_id=? controller=? subfunction=?

Parameters

Parameter

Description

Value

file_system_id

File system ID.

To obtain the value, run the "show file_system general" command.

controller

Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

subfunction

Sub-function.

The value is "bonuscache","pal_background","snap_background","flowctrl_background" or "gang_subblockcrc".

Views

Developer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/2600 V3 for Video/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

Show whether a file system's sub-function is enabled.

developer:/>show file_system switch file_system_id=3 controller=0B subfunction=bonuscache 
subfunction : bonuscache    
status : off

System Response

The following table describes the parameter meanings.

Parameter

Meaning

subfunction

Sub-function. The value can be "bonuscache","pal_background","snap_background","flowctrl_background" or "gang_subblockcrc".

status

Status. The value can be "on" or "off".

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 630757

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next