No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal worm_file_path

show pal worm_file_path


The show pal worm_file_path command is used to query the WORM information of file systems. You can query information about WORM of a specific type by specifying parameters.


show pal worm_file_path file_system_id=? info_item=?






File system ID.

To obtain the value, run the "show file_system general" command without parameters.


WORM information type.

The value can be "removing_path" and "scanning_path", where:

  • "removing_path": the removing files.
  • "scanning_path": the scanning files.


Developer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


Query the path information of files being deleted from WORM file system "2".

developer:/>show pal worm_file_path file_system_id=2 info_item=removing_path 

No file is removing.

System Response

The following table describes the parameter meanings.



File System ID

File system ID.

Scanning File Full Path

Path of files being scanned.

Removing File Full Path

Path of files being deleted.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 631930

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next