No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication_vstore cfg_switch

change remote_replication_vstore cfg_switch


The change remote_replication_vstore cfg_switch command is used to modify the configuration synchronization switch of a remote replication vStore pair.


change remote_replication_vstore cfg_switch vstore_pair_id=? partition_type=? option_type=? switch=?






Remote replication vStore pair ID.

To obtain the value, run the "show remote_replication_vstore general" command.


Type of a configuration synchronization partition.

  • "resource": resource partition.
  • "global": global partition.
  • "domain_control": domain control partition.


Option type ID.

  • For a resource partition, the value is "0".
  • For a global partition, the value is "0".
  • For a domain control partition, the value is "0", "1", or "2".


Switch status.

The value can be "on" or "off".


Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers.

OceanStor 6800 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


Modify the switch status of the configuration synchronization partition for a specified remote replication vStore pair. The pair ID is "200bc79b99520000", partition_type is "domain_control", option_type is "0", and the switch status is "Off".

developer:/>change remote_replication_vstore_pair cfg_switch pair_id=200bc79b99520000 partition_type=domain_control option_type=0 switch=off 
DANGER: You are about to perform maintenance on the vStore configuration. This operation will lead to the inconsistency of user configuration between the two ends of a vStore pair. When the vStore pair link is normal, this operation can change the status of the vStore pair configuration synchronization switch to "enabled" or "disabled". The switch is enabled by default. When the switch is disabled, user's configuration on the local end of the vStore pair only takes effect on the local end and will not be synchronized to the remote end. User configuration is not forbidden on the remote end. 
Suggestion: Before the operation, contact the engineers and perform all the operations under their guidance. Besides, confirm that: 
1. No other user is performing configuration on the system. 
2. The input operation parameters are correct.Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 641251

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next