No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear fs_snapshot residual_clone_ref

clear fs_snapshot residual_clone_ref


The clear fs_snapshot residual_clone_ref command is used to clear the redundant count of snapshot references by the cloned file system.


clear fs_snapshot residual_clone_ref snapshot_id=?






ID of the snapshot whose count of references by the cloned file system needs to be cleared.



Developer view

Usage Guidelines

  • Before performing this operation, check whether the ID of the snapshot whose redundant reference count needs to be cleared is correct.
  • This command is used when failures in creating the cloned file system and redundant count of snapshot references lead to snapshot unavailability.
  • OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


Clear the redundant count of snapshot "1@snap0" references by the cloned file system.

developer:/>clear fs_snapshot residual_clone_ref snapshot_id=1@snap0 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 633491

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next