No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reboot controller

reboot controller

Function

The reboot controller command is used to reboot a specified controller.

Format

reboot controller controller=?

Parameters

Parameter

Description

Value

controller=?

Controller ID.

The controller ID is in the format of "XA", "XB". "X" is the engine ID which starts from "0". For example, ID of controller B on engine 0 is "0B"; ID of controller A on engine 1 is "1A".

Views

Developer view, Engineer view

Usage Guidelines

  • The controller cannot process services when being rebooted.
  • This command provides an interactive mode for entering passwords. The password will be displayed behind asterisks.
  • If the number of consecutively entered incorrect passwords reaches 3 within 5 minutes, the current session will be offline.

Example

Reboot controller B on engine 0.

engineer:/>reboot controller controller=0B 
DANGER: You are going to restart controller. This operation disables the controller from loading services. 
Suggestion: Before you perform this operation, ensure that the service port of the controller has multiple paths and controller related services have been stopped. Do not perform this operation when the controller is running. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Password:****** 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 635777

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next