No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_device array_info

show remote_device array_info


The show remote_device array_info command is used to query the heterogeneous disk arrays that are connected to the storage system.


show remote_device array_info link_id=?






Indicates the link ID.

To obtain the value, run "show remote_device elink".


Developer view, Engineer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/2600 V3 for Video/5500 V3/5600 V3/5800 V3 storage systems support this command.


To query the heterogeneous disk array with the link ID of 268435457, run the following command:

engineer:/>show remote_device array_info link_id=268435457 

Link ID  :  268435457 

Remote Device ID  :  513 

Vendor  :  EMC 

Product ID  :  CX4-240

System Response

The following table describes the parameter meanings.



Link ID

Indicates the link ID.

Remote Device ID

Indicates the ID of a heterogeneous disk array.


Indicates the vendor name.

Product ID

Indicates the product model.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 632906

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next