No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dcl export

dcl export

Function

The dcl export command is used to export the node information recorded by the DCL of a specific ID.

Format

dcl export [ dclid=? ] [ startchunk=? ] [ starttime=? ] [ recordnum=? ]

Parameters

Parameter

Description

Value

dclid=?

DCL ID generated by the value-added service.

The parameter value can be obtained using the rdcl showdcl -i [ds ID= ?] command.

startchunk=?

Start chunk ID of the exported data.

The value is an unsigned long integer between '0' and '18,446,744.073,709,551,615'.

startTime=?

Start time point of the exported data.

The value is an unsigned long integer between '0' and '18,446,744.073,709,551,615'.

recordnum=?

Volume of the exported data.

The value is an unsigned long integer between '0' and '18,446,744.073,709,551,615'.

Views

Diagnostic view

Usage Guidelines

If data inconsistency occurs, you can run this command to view difference information on DCLs.

Example

Export the node information recorded by the DCL whose ID is 532. The chunk ID, start time point, and volume of the exported data is 0, 0, and 1000 respectively.

admin:/diagnose>dcl export 532 0 0 1000 

  Export dcl records to log success!

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638628

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next