No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ddp chunk_meta

show ddp chunk_meta

Function

The show ddp chunkmeta command is used to query the details about deduplication and compression metadata, including deduplication flag, compression flag, fingerprint information, and data verification value.

Format

show ddp chunk_meta domain_id=? chunk_id=? controller=?

Parameters

Parameter

Description

Value

domain_id=?

ID of the domain that you want to query.

To obtain the value, run the "show file_system general" or "show lun dedup_compress" command.

chunk_id=?

ID of the chunk that you want to query.

The value ranges from 1 to 18446744073709551615.

controller=?

Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

  • Before running this command, confirm that you have selected the correct domain ID and chunk ID.
  • When runnning this command, specify a controller ID.
  • OceanStor 2100 V3/6800 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

To query the information about the deduplication and compression metadata whose domain ID is "0" and chunk ID is "1024".

developer:/>show ddp chunk_meta domain_id=0 chunk_id=1024 controller=0A 
Chunk ID : 1024 
Extent ID : 0xe042004000600f 
Offset : 2832 
Physical Length : 8 
Gang Flag : 0 
Storage Tier : SAS 
Checksum Value : 44253 
Fingerprint : e4960db1482833ef2cc50b567ad42177ca949d96 
Reference Count : 1 
Is Compressed : No 
Is Deduped : Yes 
Compress Index : 1 
Compress Number : 1 
Ditto Flag : 0 
Logic Length : 8 
Transaction Number : 5 
Checksum Flag : 2

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Chunk ID

Chunk ID.

Extent ID

Extent ID of a physical chunk.

Offset

Extent offset of a physical chunk. Unit: section.

Physical Length

Chunk length. Unit: section.

Gang Flag

Gang chunk flag.

Storage Tier

Storage tier.

Checksum Value

Chunk verification value.

Fingerprint

Chunk fingerprint.

Reference Count

Chunk reference count.

Is Compressed

Whether a chunk is compressed.

Is Deduped

Whether a chunk is deduplicated.

Compress Index

Compressed chunk index.

Compress Number

Compression number.

Ditto Flag

Redundant chunk flag.

Logic Length

Original data length of a chunk. Unit: section.

Transaction Number

Chunk flushing transaction ID.

Checksum Flag

Verification flag.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 610380

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next