No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change slow_system_disk monitor_parameter

change slow_system_disk monitor_parameter


The change slow_system_disk monitor_parameter command is used to set the slow system disk check parameters.


change slow_system_disk monitor_parameter interval=? serve_time=? check_period=? slow_period=?






Routine check interval.

The value cannot be smaller than 10 minutes or greater than 43200 minutes.


SVCTM threshold.

The value cannot be smaller than 1ms or greater than 30000ms.


Number of latest routine check periods.

The value cannot be smaller than 1 or greater than 100.


Threshold of slow periods in a specific period. If the number of slow periods reaches the threshold, a system disk is considered as a slow system disk.

The value cannot be smaller than 1 or greater than the number of recent routine test periods.


Developer view

Usage Guidelines

OceanStor 2200 V3/2600 V3/2600 V3 for Video storage systems support this command.


Set the routine check interval to 30 minutes, the SVCTM threshold to 100ms, the numbers of latest routine check periods to 48, and the threshold of slow periods to 42.

developer:/>change slow_system_disk monitor_parameter interval=30 serve_time=100 check_period=48 slow_period=42 
CAUTION:You are about to change the slow system disk check parameters. This operation will affect the criterion of slow system disks. 
Suggestion: Before performing this operation, ensure that the slow system disk check parameters need to be changed. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 633725

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next