No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add remote_device white_list

add remote_device white_list

Function

The add remote_device white_list command is used add a white list of heterogeneous disk arrays.

Format

add remote_device white_list vendor=? product_id=? asl_id=? path_selector=? fail_back=? fail_over=?

Parameters

Parameter

Description

Value

vendor=?

Indicates the vendor name.

The value consists of 1 to 8 characters. Use asterisks (*) to replace spaces.

product_id=?

Indicates the product model.

The value consists of 1 to 16 characters. Use asterisks (*) to replace spaces.

path_selector=?

Indicates the algorithm used by a disk array to select a path.

The value can be "FIX", "ROUND_ROBIN", or "LEAST_QUEUE".

fail_back=?

Indicates the failback mode.

The value can be "FAILBACK_IMMEDIAT", "NOT_FAILBACK", or "DELAY_FAILBACK", where,

  • FAILBACK_IMMEDIATE: Failback will be performed immediately.
  • NOT_FAILBACK: Failback will not be performed.
  • DELAY_FAILBACK: Failback will be postponed.

fail_over=?

Indicates whether to enable failover.

The value can be "ENABLE" or "DISABLE", where,

  • ENABLE: to enable failover.
  • DISABLE: to disable failover.

asl_id=?

Indicates the ID of the support library of heterogeneous disk arrays.

The value is an integer between 1 and 1023.

Views

Developer view, Engineer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/2600 V3 for Video/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

To add a white list of heterogeneous disk arrays, run the following command:

engineer:/>add remote_device white_list vendor=EMC product_id=CX4-240 path_selector=FIX fail_back=NOT_FAILBACK fail_over=ENABLE asl_id=4 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 603240

Downloads: 691

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next