No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove system management_ip

remove system management_ip


The remove system management_ip command is used to remove the IP properties of management ports.


remove system management_ip eth_port_id=? ip_type=?






ID of the management port whose IP address configurations you want to delete.

To obtain the value, run "show port general".


Type of the management port's IP address that you want to delete.

The value can be:

  • "ipv4_address": The IPv4 address of the management port is deleted.
  • "ipv6_address": The IPv6 address of the management port is deleted.


Developer view

Usage Guidelines

OceanStor 2200 V3/2600 V3/2600 V3 for Video storage systems support this command.


Delete the IPv4 address of management port "CTE0.A.H4". The port ID varies depending on product models.

developer:/>remove system management_ip eth_port_id=CTE0.A.H4 ip_type=ipv4_address  
DANGER: You are about to delete the IP address configurations of the management port. This operation makes users unable to log in to the storage system using the management port. 
Suggestion: Before performing this operation, ensure that the IP address configurations of the management port need to be deleted. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 631546

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next