No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show third_party_policy operation

show third_party_policy operation


The show third_party_policy operation command is used to query the operation set monitored by a third-party policy.


show third_party_policy operation [ policy_name=? ]






Policy name.

The value contains 1 to 31 characters including only letters (case insensitive), digits, and underscores (_).


Developer view, vstore developer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/2600 V3 for Video/5500 V3/5600 V3/5800 V3 storage systems support this command.


  • Query all third-party policies under "vstore1".
    developer@vstore1:/>show third_party_policy operation  
    Policy ID Policy Name Protocol 
    -------- -------- ----------       
     1         test1        nfsv3
  • Query the third-party policy named "test" under "vstore1".
    developer@vstore1:/>show third_party_policy operation policy_name=test 
    Policy ID: 1 
    Policy Name: test 
    Protocol: nfsv3 
    Filter: nfsv3:all

System Response

The following table describes the parameter meanings.



Policy ID

Policy ID.

Policy Name

Policy name.


Protocol type.


Operation set.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 630772

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next