No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete firewall configuration

delete firewall configuration

Function

The delete firewall configuration command is used to delete firewalls.

Format

delete firewall configuration id=?

Parameters

Parameter

Description

Value

id=?

ID of the firewall to be deleted.

To obtain the value, run the "show firewall general" command.

Views

Developer view

Usage Guidelines

None

Example

Delete the firewall whose ID is "1". The ID and output vary depending on a specific product.

developer:/>delete firewall configuration id=1  
DANGER: You are about to delete a firewall. After this operation, the firewall is cleared, and the disabled service ports of the corresponding IP address or segment become available, causing security risks. 
Suggestion:  
Before performing this operation, ensure that the firewall ID is correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 607330

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next