No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete root_cause_alarm rule

delete root_cause_alarm rule

Function

The delete root_cause_alarm rule command is used to delete a rule with a specific ID from the root cause alarm rule table.

Format

delete root_cause_alarm rule rule_id=?

Parameters

Parameter

Description

Value

rule_id=?

ID of a rule in the root cause alarm rule table.

The value must be an integer from 1 to 400.

Views

Developer view

Usage Guidelines

None

Example

  • Delete rule "75" from the dynamic root cause alarm rule table.
    developer:/>delete root_cause_alarm rule rule_id=75 
    WARNING: You are about to delete the root cause alarm suppression rule. 
    This operation causes the alarms specified by the rule unable to be suppressed. 
    Suggestion: Before performing this operation, ensure that the rule ID is correct. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • Delete rule "1" from the dynamic root cause alarm rule table.
    developer:/>delete root_cause_alarm rule rule_id=1 
    WARNING: You are about to delete the root cause alarm suppression rule. 
    This operation causes the alarms specified by the rule unable to be suppressed. 
    Suggestion: Before performing this operation, ensure that the rule ID is correct. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Error: The static root cause alarm suppression rule cannot be deleted. 
    Suggestion: Disable the rule to make it invalid.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 607713

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next