No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ddp chunk_info

show ddp chunk_info


The show ddp chunk_info command is used to query the abstracts about deduplication and compression data, including fingerprint of data before deduplication and compression, and checksum of data after deduplication and compression.


show ddp chunk_info domain_id=? chunk_id=? controller=?






ID of the domain that you want to query.

To obtain the value, run the "show file_system general" or "show lun dedup_compress" command.


ID of the chunk that you want to query.

The value ranges from 1 to 18446744073709551615.


Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Developer view

Usage Guidelines

  • Before running this command, confirm that you have selected the correct domain ID and chunk ID.
  • When runnning this command, specify a controller ID.
  • OceanStor 2100 V3/6800 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


To show the abstracts of deduplication and compression chunk "15417" in domain "0".

developer:/>show ddp chunk_info domain_id=0 chunk_id=15417 controller=0A 
Chunk ID : 15417 
Checksum Value : 44253 
Fingerprint : bf916766b5d1fb83a0251a10751d8cc9d9c5198c

System Response

The following table describes the parameter meanings.



Chunk ID

Chunk ID.

Checksum Value

Chunk verification value.


Chunk fingerprint.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 676648

Downloads: 731

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next