No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal clear_trunc_xattr

show pal clear_trunc_xattr


The show pal clear_trunc_xattr command is used to query information about clearing the extended attribute generated by asynchronous truncation of the file system.


show pal clear_trunc_xattr file_system_id=? controller=?






File system ID.

The value is an integer between 0 and 65535. To obtain the value, run the "show file_system general" command without parameters.


Controller ID.

The value is in the format of "XA", "XB", "XC" or "XD", where "X" is an integer from 0 to 3. For example, "0A" and "1C".


Developer view

Usage Guidelines

  • Check whether the ID of the selected file system is correct before operation.
  • The file system ID must be entered.
  • OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


Query information about the progress of clearing the extended attribute generated by asynchronous truncation of the file system.

developer:/>show pal clear_trunc_xattr file_system_id=0 controller=0A 
Status        :     Running 
Process(%) :     10 
Start time :     Sun Jul 19 01:35:46 2017 
End time      :     --

System Response

The following table describes the parameter meanings.




Status of executing the background reclamation task.


Progress (%) of executing the background reclamation task.

Start time

Task start time.

End time

Task end time.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 630748

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next