No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change sdparam

change sdparam


The change sdparam command is used to modify some configurations of disks or LUNs, including the merging status, queue depth, and disk cache status.


change sdparam device_type=? [ merge=? | qdepth=? | cache=? ]






Device model.

The value can be LUN, SAS, SATA, SSD, or NearLine_SAS.


Status of I/O merging.

The value can be on or off, the details are as follows:

  • on: The I/O merging function is enabled.
  • off: The I/O merging function is disabled.


Queue depth of disks.

The value is an integer ranging from 1 to 64.


Status of disk write cache.

The value can be on or off, the details are as follows:

  • on: The disk write cache function is enabled.
  • off: The disk write cache function is disabled.


Developer view

Usage Guidelines



Change the cache status of LUNs to on.

developer:/>change sdparam device_type=LUN cache=on 
Command executed successfully

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 631929

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next