No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
fssnap show ro base

fssnap show ro base

Function

The fssnap show ro base command is used to query basic information about snapshots.

Format

fssnap show ro base spaceId snapName

Parameters

Parameter

Description

Value

spaceId

File system ID.

To obtain the value, run the "show file_system general" command.

snapName

Snapshot name.

To obtain the value, run the "show fs_snapshot general" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Query basic information about snapshot "test" in file system "1".

admin:/diagnose>fssnap show ro base 1 test 
snap (test): 
 ---snapObj          :4003 
 ---snapTxg          :0 
 ---snapCreateTime :1458290607 
 ---snapId           :0x104000000001 - roId 1 
 ---snapType         :0x1 
 ---snapState        :1 
 ---snapNameMap      :[test]

System Response

The following table describes the parameter meanings.

Parameter

Meaning

snapObj

Snapshot object ID.

snapTxg

Transaction ID of a snapshot.

snapCreateTime

Time when the snapshot is created.

snapId

Snapshot ID.

snapType

Snapshot type.

snapState

Snapshot state.

snapNameMap

Snapshot name.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 606936

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next