No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system min_fs

change file_system min_fs


The change file_system min_fs command is used to load or unload a mini file system to save the user data in an offline file system. Run the show file_system min_fs command to check the details.


change file_system min_fs action=? filesystem_id=?






Operation type.

The value is "load" or "unload".

  • "load": loading.
  • "unload": unloading.


File system ID.

To obtain the value, run the "show file_system general" command.


Developer view

Usage Guidelines

  • After this command is executed, dirty data in the cache of a storage system will be deleted. If you need to use the dirty data, run the "export file_system dirtydata" command to export it.
  • After the mini file system is loaded, use a share protocol to read and copy the data that is saved in the file system.
  • OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/2600 V3 for Video/5500 V3/5600 V3/5800 V3 storage systems support this command.


  • To load mini file system 1, run the following command:
    developer:/>change file_system min_fs action=load filesystem_id=1 
    DANGER:You are about to load the file system in the minimum mode. This operation may delete the dirty data of the file system from cache. 
    Suggestion: Before performing this operation, check whether you need to use the dirty data. If you need to use the dirty data, export the dirty data first by running the export file_system dirtydata command. 
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • To unload mini file system 1, run the following command:
    developer:/>change file_system min_fs action=unload filesystem_id=1 
    Command executed successfully. 

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638914

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next