No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system vstore

change file_system vstore


The change file_system vstore command is used to change the owning vStore of a file system.


change file_system vstore file_system_id=? type=? [ vstore_id=? ]






File system ID.

The value is an integer from 0 to 65535.


Target vStore type.

The value can be:

  • "system": The target vStore is the default system vStore.
  • "vstore": The target vStore is not the default system vStore.


Target vStore ID.

The value ranges from 1 to 511. To obtain the value, run the show vstore command without parameters.


Developer view

Usage Guidelines

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


Change the owning vStore of file system 0 to the default system vStore.

developer:/>change file_system vstore file_system_id=0 type=system 
WARNING:You are about to change the vStore to which the file system belongs. Pay attention to the following points: 
If NAS share, antivirus, HyperMetro, or SmartTier services are configured for the file system, delete these services before changing the owning vStore. 
1. After the owning vStore is changed, check whether NAS share, antivirus, HyperMetro, or SmartTier services of the file system exist in the original vStore. If yes, delete them. 
2. After the owning vStore is changed, reconfigure NAS share, antivirus, NDMP, HyperMetro, or SmartTier services for the file system. 
Have you read warning message carefully(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638532

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next