No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr showverifyinfo

mrr showverifyinfo


The mrr showverifyinfo command is used to view the status of metadata verification.


mrr showverifyinfo




Diagnostic view

Usage Guidelines



View the metadata verification status.

admin:/diagnose>mrr showverifyinfo 
Operate Type                  : data extent 
Disk Domain ID                : 0 
Result                        : --- 
Fail Reason                   : --- 
Begin Time                    : --- 
End Time                      : --- 
Spa Count Value               : 0,0 
Verify Extent Number          : 0 
Item Leak Number              : 0 
Conflict LUN/FS               : 0 
Conflict Queue                : 0 
Conflict Extent               : 0

System Response

The following table describes the parameter meanings.



Operate Type

Indicates the operate type.

Disk Domain ID

Indicates the disk domain ID.


Indicates the result of the operation.

Fail Reason

Indicates the fail reason of the operation.

Begin Time

Indicates the begin time of the operation.

End Time

Indicates the end time of the operation.

Spa Count Value

Indicates the count of spa module.

Verify Extent Number

Indicates the count of verify extent.

Item Leak Number

Indicates the count of leak item.

Conflict LUN/FS

Indicates the conflict count of LUN/file system.

Conflict Queue

Indicates the conflict count of queue.

Conflict Extent

Indicates the conflict count of extent.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 637292

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next