No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change tgt cmd_burst

change tgt cmd_burst


The change tgt cmd_burst command is used to change the maximum number of concurrent I/Os of the front-end TGT.


change tgt cmd_burst burst=?






Maximum number of concurrent I/Os supported by the front-end TGT.

The value ranges from 1 to 3n. The default value is n. You can run the "show tgt cmd_burst" command to obtain the default value.


Developer view

Usage Guidelines



Changing the maximum number of concurrent I/Os of the front-end TGT to 8192.

developer:/>change tgt cmd_burst burst=8192 
DANGER: You are about to change the maximum number of front-end TGT concurrent I/Os. 
This operation changes the maximum number of front-end TGT concurrent I/Os, which may cause abrupt server performance deterioration and service interruptions. 
Suggestion: Before performing this operation, ensure that you need to change the maximum number of front-end concurrent I/Os. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 636663

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next