No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
uboot1_up

uboot1_up

Function

The uboot1_up command is used to update the U-Boot.

Format

uboot1_up

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Update the U-Boot.

Hi1710_UBOOT> uboot1_up 
tftp server IP:10.76.129.139 
BMC board  IP:10.76.129.138 
file name:u-boot.bin 
TFTP from server 10.76.129.139; our IP address is 10.76.129.138 
Filename 'u-boot.bin'. 
Load address: 0x8b000000 
Loading: *2 len bad 158 < 335 
############### 
done 
Bytes transferred = 215792 (34af0 hex) 
Un-Protect Flash Bank # 1 
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the PCB cannot work normally. 

erase flash from :40100000 to :4017ffff,please wait a while 

.... done 
Erased 4 sectors 
Copy u-boot to flash,please wait a while 
 9....8....7....6....5....4....3....2....1....erase flash from :401e0000 to :401fffff,please wait a while 

. done 
Erased 1 sectors 
Protect Flash Sectors 0-15 in Bank # 1 


Success to load u-boot1.please update uboot0 and uboot1 in a uboot update process.

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138402

Views: 449443

Downloads: 644

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next