No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_possessed general

change lun_possessed general


The change lun_possessed general command is used to set the LUN possess.


change lun_possessed general lun_id_list=? possess_type=? possess_number=?






ID of the LUN whose setting must be changed.

Run the "show lun general" or "show snapshot general" command without any parameters to obtain the value. The LUN IDs separated by commas (,), or LUN ID range separated by hyphens (-), such as: 0, 5-8.


Possess type whose setting must be changed.

The value can be "page" or "chunk".


Possess size whose setting must be changed.

The value can be page or chunk.

  • The value of page is an integer between 32,768 and 999,999,999.
  • The value of chunk is an integer between 8,192 and 999,999,999.


Developer view

Usage Guidelines

Before running the command, ensure that services have been stopped. Otherwise, services may be interrupted.


Set the possess information of the LUN whose ID is 0. Sets the possess type to page and possess size to 65536.

developer:/>change lun_possessed general lun_id_list=0 possess_type=page possess_number=65536 
WARNING:You are about to modify the available cache quantity of LUN. This operation will cause cache resource to be re-allocated, then system performance may be degraded. 
Suggestion:Before performing this operation, ensure that the correct parameter is configured. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Change possessed of LUN 0 successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638634

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next