No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show statistic ndmp_connection

show statistic ndmp_connection

Function

The show statistic ndmp_connection command is used to view the NDMP connection information.

Format

show statistic ndmp_connection [ controller=? ]

Parameters

Parameter

Description

Value

controller=?

Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" indicates an integer from 0 to 3, for example, "0A" or "1C".

Views

Developer view

Usage Guidelines

If the command does not contain parameters, the command will be executed on the primary node.

OceanStor 6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

View the NDMP connection information.

developer:/>show statistic ndmp_connection controller=0A 
Client Ip     Status Connect Time(Min)  Network  
------------  ------ -----------------  --------- 
10.99.2.11 Backup 12                 2-way 
10:99::3:15 Backup 345                3-way 
10.99.2.12 Recover 8                  --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Client IP

Client IP address.

Status

Task status.

Connect Time (Min)

Connection duration (unit: min).

Network

Network mode.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 609185

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next