No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change backend_link timeout_repair_switch

change backend_link timeout_repair_switch

Function

The change backend_link timeout_repair_switch command is used to enable or disable the timeout repair function of the back-end link.

Format

change backend_link timeout_repair_switch mode=?

Parameters

Parameter

Description

Value

mode

Switch status.

The value can be "on" or "off", where:

  • "on": enables the timeout repair function.
  • "off": disables the timeout repair function.

Views

Developer view

Usage Guidelines

  • Run the "change backend_link timeout_repair_switch mode=on" command to enable the timeout repair function.
  • Run the "change backend_link timeout_repair_switch mode=off" command to disable the timeout repair function.

Example

  • Enable the timeout repair function of the back-end link.
    developer:/>change backend_link timeout_repair_switch mode=on 
    Command executed successfully.
  • Disable the timeout repair function of the back-end link.
    developer:>change backend_link timeout_repair_switch mode=off 
    WARNING: You are about to change the status of the timeout repair function switch of the back-end link. This operation may cause system exceptions. 
    Suggestion: Note the following items before executing the command: 
    1. Ensure that this command is run by the R&D engineers.  
    2. This command is applicable to all controllers. Running this command changes the status of the timeout repair function switch of the back-end link. The system will not repair the back-end link when the back-end link times out, affecting system reliability.  
    3. After running this command, check whether the system is running properly. 
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 610032

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next