No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
help

help

Function

The help command is used to show the help information of all the commands that are available in serial port mode.

Format

help

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

View the help information of commands that are available in serial port mode.

Storage: _super_admin> help 
Supported commands in this mode: 
showsuperadmin                Show all the system super administrator names. 
initpasswd                    Initialize the password of a specified super administrator. If you are failed to execute this command, you may try initlocalpasswd instead. 
chgsuperpasswd                Change the password of _super_admin. 
chgibcpasswd                  Change the password of ibc_os_hs. 
ibcpasswd                     Initialize the password of ibc_os_hs. 
initibckey                    Initialize the public-key of ibc_os_hs. 
initlocalpasswd             Initialize the password of a specified super administrator on current node. This command should only be used when the system is not normal. Make sure that you have tried initpasswd firstly. 
exit                          Quit the serial port mode. 
help                          Show the allowed commands in this mode.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 631957

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next