No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvisi showremottgtinfo

drvisi showremottgtinfo

Function

The drvisi showremottgtinfo command is used to show information about the remote target.

Format

drvisi showremottgtinfo

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

show remote target information.

admin:/diagnose>drvisi showremottgtinfo 
TargetID is :0 
Targetip is :192.168.1.1 
Target TCPPORT is :3260 
Target LocalPort is :0x20301 
Target WanttedConn is :1 
Target ActiveNow is :0 
Target ChapType is :0 
Target Recovermod is :1 
Target IsThirdParty is :0 
Session IniName is :iqn.2006-08.com.huawei:oceanstor:2100e09796bdf224::1 
Session TgtName is :iqn.2006-08.com.huawei:oceanstor:210004f93883299d::1020300:192.168.1.1 
Session pg_tag is :779 
Session isid is :80 12 34 56 78 9a 
Remote Target Link State is :1 : 0 is down; 1 is up ;other is not normal 
Congestion algorithm is : cubic

System Response

The following table describes the parameter meanings.

Parameter

Meaning

TargetID

target ID.

Targetip

Target IP address.

Target TCPPORT

Target TCP Port.

Target LocalPort

Target Local Port.

Target WanttedConn

Whether the target device needs to be connected.

Target ActiveNow

Whether CHAP authentication is effective immediately.

Target ChapType

CHAP authentication type.

Target Recovermod

Link recovery mode.

Target IsThirdParty

Whether a third-party remote target.

Session IniName

Session initiator name.

Session TgtName

Session target name.

Session pg_tag

Session pg_tag.

Session isid

Session ISID.

Remote Target Link State

Link status of the target.

Congestion algorithm

Congestion algorithm.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 632895

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next