No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_crypto_mode

change lun_crypto_mode

Function

The change lun_crypto_mode command is used to enable or disable the encryption mode.

Format

change lun_crypto_mode enabled=?

Parameters

Parameter

Description

Value

enabled=?

State of the encryption mode.

The value is "yes" or "no", where:

  • "yes": to enable the encryption mode.
  • "no": to disable the encryption mode.

Views

Developer view

Usage Guidelines

None

Example

  • To enable the encryption mode, run the following command.
      
    developer:/>change lun_crypto_mode enabled=yes 
    DANGER:You are about to enable the LUN encryption mode, which can be used together with an encryptor only. This operation may interrupt services if the disk array is not connected to an encryptor. 
    Suggestion: Enable this mode only when the disk array is connected to an encryptor. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully. 
     
  • To disable the encryption mode, run the following command.
    developer:/>change lun_crypto_mode enabled=no 
    DANGER: You are about to disable the crypto mode. This operation may cause LUN to become invalid. 
    Suggestion: Before perform this operation, ensure you do need. 
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138402

Views: 460517

Downloads: 646

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next