No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
logzone show lba

logzone show lba

Function

The logzone show lba command is used to obtain the start offset of a single log on a log zone disk.

Format

logzone show lba logzonetype=? zoneid=? logindex=?

Parameters

Parameter

Description

Value

logzonetype=?

Log zone type.

The value can be 1, 4, 5, 6, 7, 8, 9, 10, 11, 12, or 13.

  • transaction zone.
  • SNAP zone.
  • SPA zone.
  • CKG zone.
  • LUN zone.
  • RSIO zone.
  • RM zone.
  • LM zone.
  • CLN zone.
  • LUN mirror zone.
  • metadata repair zone.

zoneid=?

Internal zone ID of the log zone.

The value maps to the controller ID.

logindex=?

Log index.

The value ranges from 0 to

the total number of logs

(excluding the total number

of logs).

To obtain the total number of

logs, run the "logzone show mgr" command.

Views

Diagnostic view

Usage Guidelines

None

Example

Obtain the start offset of a log on a log zone disk.

admin:/diagnose>logzone show lba logzonetype=1 zoneid=0 logindex=0 
Lba: 2048 sectors.

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Lba

Obtained logical disk offset.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 605113

Downloads: 693

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next