No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_vstore_pair full_sync_cfg

change hyper_metro_vstore_pair full_sync_cfg


The change hyper_metro_vstore_pair full_sync_cfg command is used to fully synchronize configurations of a specific vStore pair.


change hyper_metro_vstore_pair full_sync_cfg pair_id=? partition_type=?






HyperMetro vStore pair ID.

To obtain the value, run the "show hyper_metro_vstore_pair general" command.


Type of a configuration synchronization partition.

  • "resource": Resource partition. Configurations in this partition include Resource user, Resource group, Identity mapping rule.
  • "nfs_v3": NFSv3 lock partition. The configurations in this partition includes information about NFSv3 client IP addresses.
  • "global": global partition. Configurations in this partition include CIFS service config, NFS service config, Resource user safe strategy.
  • "domain": domain controller partition. Configurations in this partition include AD domain config, NIS domain config, Ldap domain config, DNS config.


Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers.

OceanStor 2100 V3/6800 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.


Fully synchronize configurations of a specific HyperMetro vStore pair, whose ID is "200bc79b99520000" and partition type is "NFS_V3".

developer:/>change hyper_metro_vstore_pair full_sync_cfg pair_id=200bc79b99520000 partition_type=nfs_v3 
WARNING: You are going to start configuration full synchronization. 
Once configuration synchronization is started, remote configuration will be overwritten by local configuration. After configuration synhronization, the configuration cannot be restored. 
Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent configuration loss. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 637696

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next