No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete fs_remote_replication log

delete fs_remote_replication log

Function

The delete fs_remote_replication log command is used to forcibly delete the log information of a specified log.

Format

delete fs_remote_replication log local_id=?

Parameters

Parameter

Description

Value

local_id=?

Local ID of a file system remote replication.

Export the CCDB and check the incorrect local_id.

Views

Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used when you need to delete the log and you cannot delete the file system remote replication with incorrect DB information. Do not use this command in other scenarios.
  • This command must be used with the "delete fs_remote_replication feature_db" and "delete fs_remote_replication service_db"command. After deleting the corresponding log resources, restart the system.

Example

To delete the log information about the file system remote replication whose local ID is "0", run the following command.


developer:/>delete fs_remote_replication log local_id=0 
DANGER: You are about to forcibly maintain file system remote replication. This operation will cause the corresponding value-added pair to be unavailable. 
This operation enables you to forcibly delete the configuration information about a single item of file system remote replication if file system remote replication objects cannot be deleted properly. 
Suggestion: Before performing this operation, contract R&D engineers, perform all procedures under their guidance, and confirm the operation. 
1. The system is not configured by other users. 
2. The parameter values that are entered are correct. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 609079

Downloads: 695

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next