No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
logzone batchGetlogWithVnode

logzone batchGetlogWithVnode

Function

The logzone batchGetlogWithVnode command is used to batch view logs of a specified log zone on a virtual node.

Format

logzone batchGetlogWithVnode logzonetype=? vnode=? startlogid=?

Parameters

Parameter

Description

Value

logzonetype=?

Log zone type.

The value can be 1, 4, 5, 6, 7, 8, 9, 10, 11, 12, or 13.

  • transaction zone.
  • SNAP zone.
  • SPA zone.
  • CKG zone.
  • LUN zone.
  • RSIO zone.
  • RM zone.
  • LM zone.
  • CLN zone.
  • LUN mirror zone.
  • metadata repair zone.

vnode=?

Virtual node ID.

The value ranges from 0 to 15.

startlogid=?

Start log ID.

The value is

a 64-bit hexadecimal number with prefix 0x.

Views

Diagnostic view

Usage Guidelines

None

Example

Batch view transaction logs on a virtual node 0.

admin:/diagnose>logzone batchGetlogWithVnode logzonetype=1 vnode=0 startlogid=0xffffffffffffffff 
Result: OK. 
LogNum: 3. 

logId: 0x0100000000039825 
logId: 0x010000010003d221 
logId: 0x010000020003d2e8

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Result

Operation result.

logId

Log ID.

LogNum

Number of queried logs.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138402

Views: 461198

Downloads: 646

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next