No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show loopback test

show loopback test

Function

The show loopback test command is used to query the result of a loopback test.

Format

show loopback test type=? [ port_type=? ] id=? controller_id=?

Parameters

Parameter

Description

Value

type=?

Type.

The value can be "port" or "disk", where:

  • "port": external port of an interface module.
  • "disk": disk port.

port_type=?

Port type.

The value can be "ETH", "FC", "SAS", "COM" or "FCoE", where:

  • "ETH": network adapter port.
  • "FC": Fibre Channel port.
  • "SAS": SAS port.
  • "COM": serial port.
  • "FCoE": FCoE port.

id=?

Port ID.

  • When parameter "type" is set to "port", the value can be obtained by running the "show port general" command.
  • When parameter "type" is set to "disk", the value can be obtained by running the "show disk general" command.

controller_id=?

Controller ID.

The value can be obtained by running the "show controller general" command.

Views

Developer view

Usage Guidelines

None

Example

Query the result of the internal loopback test for port "0" of the network adapter in slot "A3" on controller B.

developer:/>show loopback test type=port port_type=ETH id=ENG0.A3.P0 controller_id=0B 
Loopback Test Mode : Inner 
Test Result : Pass 
Bit Error Count : 0 
Test Speed : 1G 
Max Speed : 1G 
Link Phy Count : 1 
Max Phy Count : 1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Loopback Test Mode

Loopback test mode.

Test Result

Loopback test result.

Bit Error Count

Number of bit errors.

Test Speed

Loopback test rate.

Max Speed

Maximum rate supported by the module.

Link Phy Count

Number of physical links.

Max Phy Count

Maximum number of physical links.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 630674

Downloads: 703

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next