No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ftds delay_statistics_switch

change ftds delay_statistics_switch

Function

The change ftds delay_statistics_switch command is used to enable or disable the function of collecting latency statistics by LUN or file system on a specified controller. Only one object (LUN or file system) can be collected at a time. If you set parameters repeatedly, the latest values prevail.

Format

change ftds delay_statistics_switch switch=? controller=? type=? id=?

Parameters

Parameter

Description

Value

switch

Switch for enabling or disabling a function.

The value can be "on" or "off".

controller

ID of a controller.

To obtain the value, run "show controller general".

type

Statistics type.

The value can be "lun" or "file_system".

id

Object ID.

-

Views

Developer view

Usage Guidelines

None

Example

  • Enable controller 0A to collect latency statistics of the LUN whose ID is 1.
    developer:/>change ftds delay_statistics_switch switch=on controller=0A type=lun id=1 
    Command executed successfully
  • Enable controller 0A to collect latency statistics of the file system whose ID is 1.
    developer:/>change ftds delay_statistics_switch switch=on controller=0A type=file_system id=1 
    Command executed successfully
  • Disable the function of controller 0A to collect latency statistics by LUN or file system.
    developer:/>change ftds delay_statistics_switch switch=off controller=0A 
    Command executed successfully

System Response

None

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000138402

Views: 449372

Downloads: 644

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next