No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro general

change hyper_metro general

Function

The change hyper_metro general command is used to modify HyperMetro properties.

Format

change hyper_metro general { mismatch_config_enabled=? }

Parameters

Parameter

Description

Value

mismatch_config_enabled

Whether to allow HyperMetro to be configured between two storage arrays of different performance and specifications.

The value can be "allowed" or "forbidden", where:

  • "allowed": allows HyperMetro to be configured between two storage arrays of different performance and specifications.
  • "forbidden": does not allow HyperMetro to be configured between two storage arrays of different performance and specifications.

Views

Developer view

Usage Guidelines

OceanStor 6800 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.

Example

  • Enable the function of allowing HyperMetro to be configured between two storage arrays of different performance and specifications.
    developer:/>change hyper_metro general mismatch_config_enabled=allowed 
    WARNING: You are about to enable the function of allowing HyperMetro to be configured between two storage arrays of different performance and specifications. By default, this function is disabled. After the function is enabled, the configuration of the HyperMetro domain does not check whether the two storage arrays are of the same performance and specifications. 
    Suggestion: Confirm that you want to perform this operation. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • Close the function of allowing HyperMetro to be configured between two storage arrays of different performance and specifications.
    developer:/>change hyper_metro general mismatch_config_enabled=forbidden 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 633410

Downloads: 705

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next