No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show service ndmp

show service ndmp


The show service ndmp command is used to query the NDMP configuration.


show service ndmp




Developer view, vstore developer view

Usage Guidelines

OceanStor 2100 V3/6800 V3/2200 V3/2600 V3/5300 V3/5500 V3/5600 V3/5800 V3 storage systems support this command.



System Response

The following table describes the parameter meanings.



Is Enabled

Whether to enable the NDMP service.

User Name

NDMP username.


Port number.


Listening IP address.

Restoring Quota(%)

Quota restored to the file system.

Support Snapshot

Whether to support snapshots.


NDMP protocol version.

Ignore CTime

Whether to ignore ctime during backup.

Password Expired

Whether the password expires.

PIM Buffer(MB)

Buffer size on the PIM module.

Prefetch Enable

Whether to enable the prefetch function.

Readdir Plus Enable

Whether to enable the readdir plus function.

Data Connect Mode

Data connection is in LIF port mode.

FS Global Scope

Switch for enabling the vStore file system to be globally available.

Ads Enable

Whether to enable the ADS function.

Backup Thread Num

Number of concurrent threads of a single backup task.

Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 640577

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next