No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2000, 5000, and 6000 V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3 Video Surveillance Edition, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun repair_info

show lun repair_info

Function

The show lun repair_info command is used to query LUN repair.

Format

show lun repair_info disk_domain_id=? lun_id=? action=?

Parameters

Parameter

Description

Value

disk_domain_id=?

Disk domain ID.

To obtain the value, run the "show disk_domain general" command in guest view.

lun_id=?

LUN ID.

To obtain the value, run the "show lun general" command in guest view.

action=?

0peration.

The value can be "repair"or "repair_reclaim", where:

  • "repair": to repair the LUN.
  • "repair_reclaim": to reclaim idle Extents on the LUN.

Views

Developer view

Usage Guidelines

None

Example

To check the repair status of LUN 5 in disk domain 2, run the following command.

developer:/>show lun repair_info disk_domain_id=2 lun_id=5 action=repair 
  Operate Type        : repair             
  Repair Method       : --                 
  Total Step          : 7                  
  Current Step        : 7.Finishing repair  
  Result              : Success.           
  Remaining Time(min) : 0                  
developer:/>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Operate Type

Operation type.

Repair Method

The method of repairing.

Total Step

Total steps of the operation.

Current Step

Step in progress.

Result

Execution result.

Remaining Time(min)

Expected remaining time of the current step.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138402

Views: 638520

Downloads: 707

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next