No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Parts Replacement

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. This document describes the procedure for replacing the parts of the storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Replacing an FRU

Replacing an FRU

This section describes how to use the FRU replacement tool to replace parts.

Prerequisites

The parts replacement package has been installed.

Context

FRUs are components that engineers can replace at the deployment site by performing the operations in the operation guide.

NOTE:

This section uses an optical module as an example.

Install the latest SmartKit before replacing an FRU.

Operators: technical support engineers and maintenance engineers from Huawei or certified by Huawei

Procedure

  1. Log in to SmartKit.
  2. Optional: Download the FRU Replacement tool package. If the FRU Replacement tool package has been downloaded, go to 3.

    • If you can access the Internet on your maintenance terminal, choose Home > Storage > Parts Replacement > Parts Replacement. In the dialog box that is displayed, click OK to download and install the FRU Replacement tool.
    • If you cannot access the Internet on your maintenance terminal, click Function Management on the home page. On the page that is displayed, click Import to import a package that has been exported from another SmartKit environment and install it in offline mode.
      NOTE:

      For details about offline installation operations, see Function Import and Function Export in the SmartKit User Guide.

  3. Choose Home > Storage > Parts Replacement > Parts Replacement. The Parts Replacement page is displayed.

  4. Click Device Selection. The Select Device dialog box is displayed.

    Figure 6-9 Select Device

  5. In the device list, select the device of which parts you want to replace and click OK.

    NOTE:

    If the device does not appear in the list, follow instructions in Add Device to add the device. For details, see 5 in Checking System Status.

  6. Click Parts Replacement, select the device of which parts you want to replace and click OK. In the FRU Replacement dialog box, select the parts to be replaced. For example, select Optical Module.

    The Replace Optical Module Wizard dialog box is displayed.

    NOTE:

    By default, only faulty optical modules are displayed. If you want to view all optical modules, deselect Show faulty components only.

    Figure 6-10 Replace Optical Module Wizard 4-1

  7. In the optical module list, select the optical module that you want to replace and click Next.

    Check the system before the replacement.

    Figure 6-11 Replace Optical Module Wizard 4-2

    NOTE:

    If services on the port corresponding to the replaced optical module fail, the Danger dialog box is displayed.

    • If the risk can be ignored, select I have read and understand the consequence associated with performing this operation, click OK, and go to 8.
    • If you need to perform the replacement again, click Cancel and then confirm that the interface module and the controller corresponding to the optical module are working normally. If the Danger dialog box is displayed again, contact Huawei technical support.

  8. Click Next.

    The optical module replacement page is displayed.

    NOTE:

    You can proceed to next steps only when all items pass the pre-replacement check.

  9. Replace the optical module by performing the operations in the operation guide.
  10. Click Replaced.

    The Warning dialog box is displayed.

    NOTE:

    Before this operation, you need to manually replace the faulty parts.

  11. Click OK.

    Check the system after the replacement.

    Figure 6-12 Replace Optical Module Wizard 4-3

  12. Click Next.

    The Complete page is displayed.

    Figure 6-13 Replace Optical Module Wizard 4-4

  13. Click Finish.

    The optical module replacement is complete.

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1000138807

Views: 22604

Downloads: 21

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next