No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Parts Replacement

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. This document describes the procedure for replacing the parts of the storage system in terms of safety operations, preparations, and precautions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Safety Precautions for Condensation Prevention

Safety Precautions for Condensation Prevention

Before installing the equipment, ensure that no condensation is on the equipment. Otherwise, the equipment may fail to be powered on.

If the indoor and outdoor temperature difference is 15°C or more, wait eight hours after moving devices to the equipment room and before installing them.

NOTE:

If the temperature difference cannot be determined, wait one night after moving devices to the equipment room and then install them.

Translation
Download
Updated: 2019-08-30

Document ID: EDOC1000138807

Views: 21566

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next