No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Product Description

OceanStor 2800 V3 V300R006

This document is applicable to OceanStor 2800 V3. It describes the positioning, features, typical applications, architecture, specifications, environmental requirements, standards compliance, and granted certifications of the OceanStor 2800 V3 storage system.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Particle Contaminants

Particle Contaminants

Particle contaminants and other negative environmental factors (such as abnormal temperature and humidity) may expose IT equipment to a higher risk of corrosive failure. This section specifies the limitation on particle contaminants with the aim at avoiding such risks.

The concentration level of particle contaminants in a data center should meet the requirements listed in the white paper entitled Gaseous and Particulate Contamination Guidelines for Data Centers published in 2011 by the American Society of Heating Refrigerating and Air-conditioning Engineers (ASHRAE) Technical Committee (TC) 9.9.

ASHRAE, affiliated to International Organization for Standardization (ISO), is an international organization operated for the exclusive purpose of advancing the arts and sciences of heating, ventilation, air-conditioning, and refrigeration (HVAC & R). The Gaseous and Particulate Contamination Guidelines for Data Centers is widely accepted, which is prepared by the members of ASHRAE TC 9.9, AMD, Cisco, Cray, Dell, EMC, Hitachi, HP, IBM, Intel, Seagate, SGI, and Sun.

According to the Guidelines, particle contaminants in a data center shall reach the cleanliness of ISO 14664-1 Class 8:

  • Each cubic meter contains not more than 3,520,000 particles that are greater than or equal to 0.5 μm.
  • Each cubic meter contains not more than 832,000 particles that are greater than or equal to 1 μm.
  • Each cubic meter contains not more than 29,300 particles that are greater than or equal to 5 μm.

It is recommended that you use an effective filter to process air flowing into the data center as well as a filtering system to periodically clean the air already in the data center.

ISO 14644-1, Cleanrooms and Associated Controlled Environments - Part 1: Classification of Air Cleanliness, is the primary global standard on air cleanliness classification. Table 7-3 gives the air cleanliness classification by particle concentration.

Table 7-3 Air cleanliness classification by particle concentration of ISO 14664-1 and maximum allowable concentrations (particles/m3) for particles

ISO Class

Particle Size

≥ 0.1 μm

Particle Size

≥ 0.2 μm

Particle Size

≥ 0.3 μm

Particle Size

≥ 0.5 μm

Particle Size

≥ 1 μm

Particle Size

≥ 5 μm

Class 1

10

2

-

-

-

-

Class 2

100

24

10

4

-

-

Class 3

1000

237

102

35

8

-

Class 4

10,000

2370

1020

352

83

-

Class 5

100,000

23,700

10,200

3520

832

29

Class 6

1,000,000

237,000

102,000

35,200

8320

293

Class 7

-

-

-

352,000

83,200

2930

Class 8

-

-

-

3,520,000

832,000

29,300

Class 9

-

-

-

-

8,320,000

293,000

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1000138808

Views: 12919

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next