No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the CLI of the Storage System (SVP's Management Network Port)

Logging In to the CLI of the Storage System (SVP's Management Network Port)

After logging in to the storage system through the command line interface (CLI), you can query, set, manage, and maintain the storage system.

You can log in to the storage system by either of the following methods:

  • Through the remote login software
    • You can log in to the CLI by using the IPv4 address or IPv6 address.
    • After the maintenance terminal can correctly communicate with the SVP, you can log in to the storage system by using the remote login software (for example, PuTTY) that supports the SSH protocol.
  • Through the SVP
    • From a local computer
    • From a remote desktop

Logging In to the Storage System Through the Remote Login Software

NOTE:
  • This document uses the PuTTY software as an example. You can download PuTTY from chiark website.
  • You are advised to use the latest version of PuTTY, otherwise you may fail to log in to the storage system.
  1. Run the PuTTY software. The PuTTY Configuration dialog box is displayed, as shown in Figure 2-13.
    Figure 2-13 PuTTY Configuration dialog box

  2. Select Session. Type the IP address of the SVP management network port in the Host Name (or IP address) text box in the Specify your connection by host name or IP address area. The IP address 192.168.6.96 is used as an example. Set Connection type to SSH.
  3. Click Open, and the interface is displayed, and the following output is displayed.
    login as:
  4. Enter the user name and password as prompted. You are required to change the password upon your initial login to ensure system security. If the login succeeds, the following information is displayed.
     
    login as: admin 
     
    Authorized users only. All activity may be monitored and reported. 
    Using keyboard-interactive authentication. 
    password: 
     
    WARNING: You have accessed the system operated by Huawei. 
    You are required to have a personal authorisation from the system administrator before you use this computer. Unauthorised access to or misuse of this system is prohibited. 
     
    For security purposes, please change the initial password and log in to the system using the new password. 
    Old password:************* 
    New password:************** 
    Reenter password:************** 
     
      System Name     : Huawei.Storage 
      Health Status : Normal 
      Running Status  : Normal 
      Total Capacity  : 6.240TB 
      SN              : 210235G6TFZ0C7000045 
      Location        : 
      Product Model : XXXXX 
      Product Version : VXXXRXXXCXX 
      Time          : XXXX-XX-XX/16:38:22 +08:00 
    admin:/>
NOTE:
  • The default user name and password of the super administrator are admin and Admin@storage respectively.
  • Product Model and Product Version vary with the actual device you have logged in to. The actual interface display prevails.
  • You are advised to change your login password periodically in the future by executing the change user_password command. This reduces the password leakage risks.
  • If you forget the password of an administrator or a read-only user, contact the super administrator to run change user to reset the password. If you forget the password of the super administrator (admin by default), contact root administrator _super_admin to log in to the CLI through a serial port and run initpasswd to reset the password.
  • If you enter incorrect passwords for a specified number of times (3 times by default and equal to the value specified in Number of Incorrect Passwords on the Login Policy page), the account is automatically locked for the period of lock time.
    • For V300R006C30 and earlier versions, the lock period is 15 minutes by default.
    • For V300R006C50 and later, the lock period is 5 minutes by default

Logging In to the Storage System Through the SVP

  1. Log in to the SVP.
    • When logging in to the SVP from a local computer, log in to the Windows operating system built in the SVP by using the keyboard, video, and mouse (KVM) of system bay 0.
  2. Log in to the SVP host as user svp_user. The default password is Aguser@12#$.
  3. On the host desktop, choose Applications > System > Terminal > Xterm.
  4. In the command window that is displayed, run vncviewer :1.

    Go to the login page of the Windows operating system built in the SVP.

  5. Type the user name and password in the login page of the Windows operating system built in the SVP, and press Enter.
NOTE:

The initial user name and password are maintainer and Maintainer@svp, respectively.

  • When logging in to the Windows operating system built in the SVP from a remote desktop, perform the following operations:
  1. On a maintenance terminal, choose Start > All Programs > Attachment > Remote Desktop Connection.

    The Remote Desktop Connection dialog box is displayed.

  2. In the Computer text box, type the IP address of the SVP management network port that is connected to the maintenance terminal. Press Enter.
  3. Type the user name and password to log in to the Windows operating system built in the SVP.
NOTE:

The initial user name and password are maintainer and Maintainer@svp.

  1. On the desktop of the Windows operating system built in the SVP, start PuTTY and click Session. In the Host Name (or IP Address) text box of the Specify your connection by host name or IP address area, enter 172.17.126.11 (to log in to the CLI of the SVP) or 172.16.192.200 or 172.16.193.200 (to log in to the CLI of the disk array). Then set Connection type to SSH.
  2. Click Open, and the interface is displayed, and the following output is displayed.
    login as:     
  3. Enter the user name and password as prompted. You are required to change the password upon your initial login to ensure system security. If the login succeeds, the following information is displayed.
     
    login as: admin 
     
    Authorized users only. All activity may be monitored and reported. 
    Using keyboard-interactive authentication. 
    password: 
     
    WARNING: You have accessed the system operated by Huawei. 
    You are required to have a personal authorisation from the system administrator before you use this computer. Unauthorised access to or misuse of this system is prohibited. 
     
    For security purposes, please change the initial password and log in to the system using the new password. 
    Old password:************* 
    New password:************** 
    Reenter password:************** 
     
      System Name     : Huawei.Storage 
      Health Status : Normal 
      Running Status  : Normal 
      Total Capacity  : 6.240TB 
      SN              : XXXXXX 
      Location        : 
      Product Model : XXXXX 
      Product Version : VXXXRXXXCXX 
      Time            : 2015-04-09/16:38:22 +08:00 
    admin:/>
NOTE:
  • The default user name and password of the super administrator are admin and Admin@storage respectively.
  • Product Model and Product Version vary with the actual device you have logged in to. The actual interface display prevails.
  • You are advised to change your login password periodically in the future by executing the change user_password command. This reduces the password leakage risks.
  • If you forget the password of an administrator or a read-only user, contact the super administrator to run change user to reset the password. If you forget the password of the super administrator (admin by default), contact root administrator _super_admin to log in to the CLI through a serial port and run initpasswd to reset the password.
  • If you enter incorrect passwords for a specified number of times (3 times by default and equal to the value specified in Number of Incorrect Passwords on the Login Policy page), the account is automatically locked for the period of lock time.
    • For V300R006C30 and earlier versions, the lock period is 15 minutes by default.
    • For V300R006C50 and later, the lock period is 5 minutes by default
Download
Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 35932

Downloads: 2043

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next