No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting the Storage Device

Restarting the Storage Device

If you want to restart the storage device, perform operations described in this section.


No service is running on the storage device.


Exercise caution when you restart the storage device as doing so interrupts the services running on the device.


  1. Log in to DeviceManager.
  2. Choose Settings > Restart System.
  3. Confirm the information in the displayed Danger dialog box and enter the password of the currently logged in user. Then select I have read and understand the consequences associated with performing this operation.

    If you enter the wrong password more than three times within 5 minutes, the current user will be logged out and exit DeviceManager.

  4. Click OK.

    The Success dialog box is displayed, indicating that the operation succeeded.

  5. Click OK. You have restarted the storage device.
Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 36135

Downloads: 2047

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next