No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

OceanStor V3 Series V300R006

This document is applicable to OceanStor 2200 V3, 2600 V3, 5300 V3, 5500 V3, 5600 V3, 5800 V3, 6800 V3, 18500 V3, and 18800 V3. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying VM Status

Querying VM Status

This section explains how to query the status of running VMs.


Xshell 5 has been installed on the maintenance terminal.


  1. Log in to the host running the SVP.

    1. Start the Xshell 5 software on the maintenance terminal.

      The Xshell 5 (Free for Home/School) window is displayed.

    2. Choose File > New.

      The New Session Properties window is displayed.

    3. Set Protocol and Port Number to SSH and 20 respectively. Set Host to the IP address of the SVP management port. Click OK.
    4. In the Sessions dialog box that is displayed, click the newly created session and click Connect.
    5. On the SSH User Name page that is displayed, enter the user name (svp_user by default) for logging in to the host and click OK.
    6. In the SSH User Authentication dialog box, select Keyboard Interactive and click OK.
    7. In the SSH User Authentication - Keyboard Interactive dialog box that is displayed, enter the password. The default password is Aguser@12#$. Click OK.

    Upon first login, the system will prompt you to change the default password. Enter the new password in subsequent logins.

    You have successfully logged in to the host running the SVP.

  2. Run su root to switch to the root account.
  3. Enter the password as prompted (Admin@12#$ by default) and press Enter.
  4. Run virsh list --all to view VM status.

    # virsh list --all 
    Id     Name                  State 
    27     Linux                 running 
    28     Windows               shut off

Updated: 2019-07-12

Document ID: EDOC1000138854

Views: 36240

Downloads: 2049

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next